40W DC to AC Inverter Circuit (12V

This inverter circuit converts 12V DC to 220V AC (square wave) using a transformer and a few common components. It’s designed to handle up to 40 watts, suitable for light AC loads like LED bulbs, small fans, chargers, etc.

🔧 Basic Components Required:

• Transformer: 12V-0-12V to 220V (5A, center-tapped)

• Transistors: 2× TIP41 (or 2N3055/MJE13007)

• Resistors: 2× 220Ω (1W)

• Capacitor: 0.1µF ceramic

• Oscillator: Simple astable multivibrator (2× resistors + 2× capacitors OR IC-based)

• Battery: 12V lead-acid (7Ah or higher recommended)

⚙️ Working Principle:

1. An oscillator circuit (transistor or IC 555-based) generates a square wave signal (~50Hz).

2. This signal drives the base of two power transistors alternately.

3. The transistors switch the center-tapped transformer, which steps up the 12V pulses to ~220V AC (square wave).

🔄 Circuit Schematic (Text Version):

• The bases of T1 and T2 are connected to an oscillator (either with transistors or 555 timer).

• The center tap of the transformer goes to +12V.

• The two ends of the 12V winding are connected to the collectors of the transistors.

• Emitters go to ground.

🛑 Important Notes:

• This produces a square wave, not a sine wave — not suitable for inductive loads (like motors or sensitive electronics).

• Ensure adequate heat sinks for the transistors.

• Use a fuse or protection circuit to prevent overload.

• For more efficiency and cleaner output, consider MOSFET-based or PWM-based inverter designs.